| |
Note: The AVT-5041SP and AVT 5041PC are no longer available and are listed here for reference purposes only
AVT-5041 Series Passive Signal
Selectors allow you to route up to four sources to a single destination.
All three models are mechanical devices and do not require any power connection,
therefore, they provide no signal amplification or processing. These are
useful in situations where the source equipment is close to the destination
device. Four front panel pushbuttons are provided to choose which
input is routed to the output. The three unused inputs are terminated
in the proper impedance. Since they are passive devices, the bandwidth
is very high and they introduce no signal degradation. The AVT-5041V is
used for Composite Video and has an RCA connector for each of the 4 inputs
and one for the output. The AVT-5041SP is used for Stereo Audio
or Speaker selection and has a Mini Stereo connector for each of the 4
inputs and one for the output. The AVT-5041PC is used for PC Video
and has an HD-15 connector for each of the 4 inputs and one for the output.
|
|
